Overview
HiOSO Ficom FC650F is a kind of 10/100Mbps adaptive fast Ethernet fiber media converter, with a built-in 3-port 10/100Mbps adaptive switch, which can implement mutual conversion between 10Base-T/100Base-TX twisted pair electrical signal and 100Base-FX optical signal.
FC650F can extend the transmission distance of a network from 100m over copper wires to 120Km.
It supports two different types of network connection media types: 10/100Base-TX and 100Base-FX.
With the application of the switching technology and the storing & forwarding technology, FC650F supports transmission in dual-fiber multi-mode��ual-fiber single-mode and single-fiber single-mode fibers.
Features
· Adaptive 10Mbps and 100Mbps environments, for the convenience of network upgrade;
· Efficient built-in switching core, to implement flow control and reduce broadcast packets;
· Provide 3 independent 10/100Mbps adaptive switching-type twisted pair ports, to implement electrical interface backup and multi-user access;
· Provide electrical interfaces based on VLAN switch setting, and supporting the connection of users from different units;
· Support full-duplex and half duplex transmission modes and capable of automatic negotiation;
· Support automatic crossing of twisted pair ports, for the convenience of system debugging and installation;
· Support the transmission of extra-long packets (with the maximum length of 1552 bytes);
· Support Quality of Service (QoS) and ensuring transmission of VoIP packets;
· Support Spanning Tree Protocol (STP) to form a redundant network;
· Low power consumption, low heat and capable of stable operation for a long period of time;
· Support multiple types of fiber ports such as dual-fiber multi-mode��ual-fiber single-mode and single-fiber single-mode, expanding the requirements of users;
Application
10/100Mbps fast Ethernet long-distance transmission network
Technical Specifications
Parameter
|
Specifications
|
Access mode
|
10/100Mbps
|
Standard
|
IEEE802.3 10Base-T Ethernet, IEEE802.3u, 100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,
IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree
|
Wavelength
|
850nm/1310nm/1550nm
|
Transmission distance
|
Dual-fiber multi-mode: 2Km;
Dual-fiber single-mode: 25/40/60/80/100/120Km;
Single-fiber single-mode: 25/40/60/80/100Km
Category-5 twisted pair: 100m
|
Port
|
1/3 RJ45 connector, connected to STP/UTP category-5 twisted pair
Two fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125μm)
Single mode - SC/FC fiber port (fiber size: 9/125μm)
Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125μm)
|
Conversion mode
|
Medium conversion, storing and forwarding mode
|
MAC address table
|
I K
|
Buffer space
|
1Mbit
|
Flow control
|
Full duplex state: flow control; half duplex state: back pressure mode
|
Delay
|
9.6us
|
Bit error rate
|
<1/1000000000
|
MTBF
|
100,000 hours
|
LED
|
POWER (power), FX LINK/ACT (fiber connection/action)
FDX (FX full duplex mode), FX100 (Fiber, with a transmission rate of 100M)
TP1/2/3 LINK/ACT (1/2/3-port twisted pairs connection action)
TP1/2/3100 (1/2/3-port twisted pairs, with a transmission rate of 100M)
|
Power
|
DC5V/1A (external)
|
Power consumption
|
3.5W
|
Operating temperature
|
-10~55��/span>
|
Operating humidity
|
5%~90%
|
Storage temperature
|
-40~70��nbsp;
|
Storage humidity
|
5%~90% (non-condensing)
|
Dimensions
|
26mm(Height)*70mm(Width)*98mm(Depth) (external power)
|
Order Information
Model
|
Rate
(Mbps)
|
Mode
|
Working
Wavelength
(nm)
|
Transmission
Distance
(Km)
|
Fiber
Interface
|
Power
|
FC650FM2-
SC/ST
|
10/100
|
Dual-fiber multi-mode
|
1310
|
2
|
SC/ST
|
External
DC5V/1A
|
FC650FS20/40/60 -SC/FC
|
10/100
|
Dual-fiber single-mode
|
1310
|
25/40/60
|
SC/FC
|
External
DC5V/1A
|
FC650FS80/100/120-SC/FC
|
10/100
|
Dual-fiber single-mode
|
1550
|
80/100/120
|
SC/FC
|
External
DC5V/1A
|
FC650FS-S20/40/60-SC
|
10/100
|
Single-fiber single-mode
|
1310/1550
|
25/40/60
|
SC
|
External
DC5V/1A
|
FC650FS-S80/100-SC
|
10/100
|
Single-fiber single-mode
|
1310/1550
|
80/100
|
SC
|
External
DC5V/1A
|